Document toolboxDocument toolbox

GDS Dynamic Testing System Handbook (DYNTTS)

Owned by David Maxfield (Deactivated)
Last updated: Apr 26, 2021 by Diogo Teles (Deactivated)
1 min read

2Hz/5Hz/10Hz DYNTTS

 

 

Table of Contents

Introduction

 

The DYNTTS handbook is a comprehensive manual to enable the user to be knowledgeable in the individual components of the system, as well as its practical use. This handbook provides the user with a detailed description of each item within the implementation of the 2-10 Hz Dynamic triaxial testing hardware (DYNTTS). It is not designed for a complete maintenance guide however, but more specifically as an overall guide to introduce the user to the system with examples of typical testing procedures.

Overview of the system

The DYNTTS system consists of the following major subsystems :

 

  • Actuator Unit, Cell Top and Balanced Ram

  • Cell Pressure Controller and/or Sig 3 controller

  • Back Pressure Controller

  • Signal Conditioning Units

  • GDSDCS-Light Control System

*Single Phase/ Three Phase Isolating Transformer 110/ 250V is recommended for any DYNTTS system.