...
Close GDSLAB and confirm that the dongle is plugged into a USB port on the PC and its .
Is the red light is turned on.
...
?
No → Then plug in the dongle and run GDLAB, If it is, then
or
Yes → Then plug it into a different USB port.
...
This should remove the currently installed driver
Restart your computer
Press the windows/start button on your keyboard (or lower left corner button) and write CMD, open the application as administrator
Copy the line below and paste it in the CMD window you opened earlier
| Code Block |
|---|
c:\hasp_temp\Sentinel_LDK_Run-time_cmd_line\haspdinst -i -kp -fss -ld |
...
If you are still having issues, please proceed to the next step.
4. Re-register the
...
HASP library
Unplug the dongle and unregister the file GDS_Hasp.dll located in C:\GDSLAB\Plug-ins
...